Maintaining and fixing Antminer T17+ hash boards may be a frightening activity, but with the right know-how and steerage it is feasible to keep the components running optimally. This guide will present useful recommendations on how to detect problems in the board, and tips on how to diagnose, repair service and sustain them for optimum efficiency.

When to hunt Professional Assistance Whilst a lot of difficulties is usually solved with simple troubleshooting, you will discover occasions when Qualified help is necessary: Intricate Components Issues: When you suspect a serious hardware malfunction, such as a ruined control board or a power supply failure, it's best to consult with experts.

Computer software Inspection: The miner's interface usually supplies specifics of the control board design and firmware version.

This will likely endorse the chip pins and pads to re-operate, then the tin really should be eradicated to accomplish the effect of re-tinning. If your failure persists just after re-soldering, the chip have to get replaced instantly.

Performance Optimization: For advice on optimizing your miner's general performance or for firmware updates, Skilled services can offer the abilities you require.

Efficiency: Updates can improve the mining performance of your hardware, leading here to much better hash charges.

There are 26 voltage domain continuous existing chips on The full board, distributed beneath the warmth sink to the reverse facet in the hashboard. The operate of the component would be to stabilize the voltage and supply a preset commencing current towards the voltage area where by it is located.

within the T21, not pink compared to the S21. The colour modify is amongst the couple of variations we see concerning The 2 types.

Soon after fixing a hash board, it must undergo at the very least two checks to ensure that it's performing correctly. If it fails possibly of such assessments, It will likely be turned down.

The widespread theme Here's the striking similarities involving the S21 and T21 – in style, firmware, and performance.

Disclaimer: The data delivered on this blog site is for informational reasons only and should not be taken as any sort of advice.

Find the filter capacitor with the input end, link its constructive pole towards the enter terminal about the module; the damaging pole to the bottom terminal.

Remember to Be aware which the firmware of your Miner product applicable to this control board differs, be sure to position an buy in accordance with the accurate design

Following destruction, it's going to induce a voltage change while in the voltage domain, leading to a hashboard’s unstable operation.